How to maintain the emulsifying machine
Emulsifier has been widely used in the industry, especially in the cosmetics industry. It is necessary to use the emulsifying machine to better combine the ingredients of cosmetics. So, how should the emulsifying machine be maintained in order to extend its service life in the process of using the emulsifying machine?
Emulsifier is widely used, which has the functions of rapid homogeneous emulsification, heating, cooling, vacuum degassing, discharging, etc. It has the advantages of good homogeneous emulsification effect (particle size up to 2um), good sanitary production conditions, high thermal efficiency, thorough and convenient cleaning, reliable electrical control, stable operation, convenient operation and maintenance, and low labor intensity. It is the ideal equipment for the production of cream, cream, honey and cosmetics.
In order to maintain the working efficiency and product quality of the emulsifying machine, as well as extend its service life, the emulsifying machine must be used and maintained regularly. Wuxi Jiangke Automation reminds you of the following matters for the maintenance and use of the emulsifying machine:
1. Do a good job in daily cleaning and sanitation of the emulsification machine.
2. Maintenance of electrical equipment: it is necessary to ensure that the equipment and electrical control system are clean and sanitary, do a good job of moisture-proof and anti-corrosion, and do a good job of ventilation, dust removal and other heat dissipation work for the frequency converter. If this is not done well, it may have a great impact on electrical equipment, or even burn electrical equipment. (Note: Before the maintenance of electrical appliances, turn off the main switch, lock the electrical box with a padlock, and do a good job of safety signs and safety protection).
3. Heating system: the safety valve shall be checked regularly to prevent the valve from being rusted, stuck and invalid. The drain valve shall be checked regularly to prevent the blockage of sundries.
4. Vacuum system: the vacuum system, especially the water ring vacuum pump, sometimes gets stuck in the rotor due to rust or debris during use, causing the motor to burn. Therefore, during daily maintenance, check whether there is a locked rotor; The water ring system shall be smooth. If the vacuum pump is blocked when starting during use, stop the vacuum pump immediately, and clean the vacuum pump before starting again.
5. Sealing system: there are many seals in the emulsification machine, and the dynamic and static rings of the mechanical seal should be replaced regularly. The cycle depends on the frequency of equipment use. The cooling system of the double end mechanical seal should be checked regularly to avoid the mechanical seal being burnt out due to cooling failure; The framework seal shall be made of appropriate materials according to the characteristics of materials, and shall be replaced regularly according to the maintenance manual during use.
6. Lubrication: for motors and reducers, replace the lubricating grease regularly according to the user manual. For those frequently used, check the viscosity and acidity of the lubricating grease in advance, and replace the lubricating oil in advance.
7. During the use of the equipment, users must regularly send the instruments and meters to relevant departments for verification to ensure the safety of the equipment.
8. In case of abnormal sound or other faults during the operation of the emulsification machine, the machine shall be stopped immediately for inspection. The machine shall not operate until the faults are eliminated.
I hope you can carefully study and understand the above maintenance methods for the emulsification machine in the use process. Only the correct maintenance of the emulsification machine can make the emulsification machine play a better role and bring more benefits to people. If you have any questions, please contact us.