1. The main pot of the vacuum emulsifier can generally be discharged from the bottom or turned over. There is a point to pay attention to here. When the emulsification pot is turned over and discharged, remember not to start the lifting device. , so as to avoid the collision between the stirring device of the emulsification pot falling above and the emulsification pot below, resulting in damage to the emulsification equipment. After the emulsifying pot is discharged and the pot body returns to the positive position, the lifting device can be started.
2. There is another point to pay attention to in the lifting and lowering of the lid. Before the upper lid of the emulsification pot rises to a high point, the emulsification pot is prohibited to open and turn over, which is also to prevent the stirring device from colliding with the emulsification tank.
3. When the emulsifying pot is discharging, and the pot body and lid of the emulsifying pot are locked by the safety lock, it is also forbidden to start the lifting device in this case.
4. When the vacuum system of the emulsifier is started and a negative pressure is formed in the pot, it is forbidden to start the lifting device of the vacuum emulsifier.
5. After the lid of the emulsification pot is raised, it is forbidden to start the stirring device of the vacuum emulsifier to avoid personal injury.